http://https://www.lead1pass.com/Microsoft/70-698-practice-exam-dumps.html (130 Q&As Dumps, 30%OFF Special Discount: 30free )

NEW QUESTION NO: 5
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
You have a computer named Computer1 that has a virtual hard disk (VHD) named Disk1.vhdx.
You plan to configure Computer1 for dual boot from Disk1.vhdx.
You need to install Windows on Disk1.vhdx by using dism.exe.
What should you run before you install Windows?
A. Add-Windows Image
B. bcdboot.exe
C. bcdedit.exe
D. bootcfg.exe
E. bootim.exe
F. bootsect.exe
G. diskpart.exe
H. Expand-Windows Image
Answer: G
Section: (none)
Explanation/Reference:
Explanation:
https://msdn.microsoft.com/en-us/windows/hardware/commercialize/manufacture/desktop/boot-to-vhd-- native-boot--add-a-virtual-hard-disk-to-the-boot-menu

NEW QUESTION NO: 6
You have a computer named Computer1.
You obtain a new driver for a device installed on Computer1. The driver package is stored in C:\Drivers and includes the following files:
Driver.inf

Driver.dll

Driver.sys

Driver.cat

You need to install the driver on Computer1 by using File Explorer.
Which file should you use to initiate the installation?
A. Driver.sys
B. Driver.dll
C. Driver.cat
D. Driver.inf
Answer: D
Section: (none)
Explanation/Reference:
Explanation:
Right-click on the .inf file and select Install.

NEW QUESTION NO: 7
A user reports that a computer was slower than expect during the last week.
You need to identify any application failures that occurred during the last week.
Which tool should you use?
A. Performance Monitor
B. Task Manager
C. Resource Monitor
D. Reliability Monitor
Answer: D
Section: (none)
Explanation/Reference:
Explanation:
http://www.pcworld.com/article/2999237/windows/how-to-use-windows-10s-reliability-monitor-to-fix-and- fine-tune-your-pc.html

NEW QUESTION NO: 8
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named contoso.com. All computers are members of the domain and run the 64-bit version of Windows 10 Enterprise.
On a test computer named Computer_Test1, you pin several company-specific applications in a group named Contoso Apps, and then you export the Start menu layout to a file named Contoso.xml.
You install Client Hyper-V on a computer named Computer6.
You identify the following requirements:
Install the Hyper-V feature on a computer named Computer1.

Use virtual smart card authentication on a computer named Computer2.

Enable Secure Boot on a computer named Computer3.

Connect a computer named Computer4 to a projector by using Miracast.

Ensure that a user named User1 can use keyboard shortcuts by pressing one key at a time.

Ensure that you can share the clipboard between Computer6and the virtual machines running on

Computer6.
Add the Contoso Apps group to the Start menu of a computer named Computer7.


Which hardware feature must Computer4 must support?
A. a Wi-Fi adapter
B. a Bluetooth adapter
C. an HDMI port
D. a MiniDisplayPort connector
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
https://www.microsoft.com/en-za/windows/windows-10-specifications#sysreqs

NEW QUESTION NO: 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
While performing maintenance on a computer, you open Indexing Options, and then you click Pause.
You complete the computer maintenance.
You need to resume indexing.
Solution: From the Start menu, you click Power and then you click Restart.
Does this meet the goal?
A. Yes
B. No
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
http://www.techbuzz.in/restart-or-resume-windows-indexing-services-after-pausing.php

NEW QUESTION NO: 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
While performing maintenance on a computer, you open Indexing Options, and then you click Pause.
You complete the computer maintenance.
You need to resume indexing.
Solution: From the Services console, you restart the Windows Search service.
Does this meet the goal?
A. Yes
B. No
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
http://kb.ischool.uw.edu/how-to-startrestart-the-windows-search-service/

NEW QUESTION NO: 11
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains a single Active Directory domain named adatum.com. The network contains five servers configured as shown in the following table.

All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:

All of the client computers run the 64-bit version of Windows 10. User3 frequently accesses ShareA.
Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:
Ensure that you can test unsigned device drivers on Computer1

Enable Credential Guard on Computer2.

Run commands and cmdlets remotely on computer2.

Configure User Account control (UAC) on Computer3 to prompt administrators for credentials when

elevated privileges are required.
Ensure that User1 can view and interact with a desktop session of User3.

Ensure that User2 can use Telnet to manage the mainframe.

Ensure that User4 can use Remote Desktop to access Computer4 remotely.


You need to meet the requirement for administering Computer2 remotely.
Which remote management technology should you use?
A. Windows PowerShell remoting
B. Telnet
C. PsExec
D. Remote Desktop
Answer: A
Section: (none)
Explanation/Reference:
Explanation:
Explanation:
https://msdn.microsoft.com/en-us/powershell/scripting/core-powershell/running-remote-commands

NEW QUESTION NO: 12
You have a computer named Computer1 that is configured to install updates from Windows Server Update Services (WSUS).
Microsoft releases a new Windows update that is not approved in WSUS.
You need to install the update on Computer1.
What should you do?
A. From a command prompt, run gpupdate /force /sync.
B. Click Check online for updates from Microsoft Updates, and then check for updates.
C. Clear the defer upgrades check box, and then check for updates.
D. From Windows PowerShell, run the Get-WindowsUpdateLog cmdlet, and then run the Update- Module cmdlet.
Answer: B
Section: (none)
Explanation/Reference:
Explanation:

NEW QUESTION NO: 13
HOTSPOT
You have a computer named Computer1 that runs Windows 10.
You run the Get-VMHost | fl* cmdlet on Computer1, and you receive the following output:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the output.
Each correct selection is worth one point.
Hot Area:

Answer: 

Section: (none)
Explanation/Reference:
Explanation:
*Box 1*
can perform a maximum of two concurrent
*Box 2*
can perform a maximum of two concurrent
https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/set-vmhost

NEW QUESTION NO: 14
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
Your network contains a single Active Directory domain. The domain contains devices that run Windows
10 Enterprise.
You need to prevent computers from connecting to hosts on subnet 131.107.0.0/24.
What should you do?
A. Click Turn on password protected sharing.
B. Disable Network Discovery.
C. Modify the Profile settings of an incoming firewall rule.
D. Run the Add-VpnConnectionTriggerApplication cmdlet.
E. Run the New-NetFirewallRule cmdlet and specify the- Direction Outbound parameter.
F. Run the New-VpnConnection cmdlet.
G. Run the Set-NetConnectionProfile cmdlet.
H. Run the Set-VPNConnection cmdlet.
Answer: E
Section: (none)
Explanation/Reference:
Explanation:
https://technet.microsoft.com/en-us/library/jj554908(v=wps.630).aspx

NEW QUESTION NO: 15
You have a computer named Computer1 that has the Hyper-V feature enabled.
You have two virtual machines named VM1 and VM2 hosted on Computer1. VM1 can communicate with VM2 and Computer1. VM1 fails to connect to the Internet- Computer1 can connect to the Internet.
You need to ensure that VM1 can connect to the Internet.
What should you do?
A. On Computer 1, modify the network settings.
B. Enable port mirroring on VM1.
C. Create an external virtual switch and configure VM1 to use the switch.
D. On VM1, select Enable virtual LAN identification.
Answer: C
Section: (none)
Explanation/Reference:
Explanation:
http://www.technig.com/connect-hyper-v-machines-to-internet/