http://https://www.newpassleader.com/Microsoft/70-735-exam-preparation-materials.html (65 Q&As Dumps, 30%OFF Special Discount: 30free )

NEW QUESTION NO: 6
You have an image of Windows 10.
You obtain a feature update for Windows 10.
You need to include the feature update in the image. The solution must minimize the size of the image.
What should you do?
A. Mount the image. Run dism.exe /Add-Package, and then run dism.exe /Optimize-Image. Unmount the image.
B. Deploy the image to a computer. Install the feature update. Optimize the drive, and then capture the image.
C. Download the new installation media for Windows 10. Install Windows 10 on a computer, and then capture the image.
D. Mount the image. Run dism.exe /Add-Package, and then run dism.exe /Cleanup-Wim. Unmount the image.
Answer: C
Explanation/Reference:
Explanation:

NEW QUESTION NO: 7
HOTSPOT
You have an image of Windows 10 Anniversary Update.
You plan to deploy the image to several new computers.
You must add Microsoft Office 2016 to the image.
You have a Configuration.xml file that will be used to deploy Office 2016. The contents of the file are shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:

Answer: 

Explanation/Reference:
Explanation:
References:
https://support.office.com/en-gb/article/Configuration-options-for-the-Office-2016-Deployment-Tool- d3879f0d-766c-469c-9440-0a9a2a905ca8

NEW QUESTION NO: 8
You are preparing a push-button reset solution.
You extract a Windows Recovery Environment (Windows RE) boot image from an image of Windows 10.
You plan to use scanstate.exe to capture several Windows desktop applications.
Which two folders from the Window Assessment and Deployment Kit (Windows ADK) should you include in the Windows RE build environment?
A. User State Migration Tool (USMT) and Windows Preinstallation Environment
B. Windows Preinstallation Environment and Common
C. User State Migration Tool (USMT) and Windows Setup
D. Windows Setup and Deployment Tools
Answer: C
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/deploy-push-button-reset- features

NEW QUESTION NO: 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are building a new image of Windows 10 that contains a push-button reset solution.
You need to test whether push-button reset works as expected.
Solution: You start the computer from the installation media for Windows 10. You click Troubleshoot, and then you click System Image Recovery.
Does this meet the goal?
A. No
B. Yes
Answer: A

NEW QUESTION NO: 10
You have a Windows Recovery Environment (Windows RE) image.
You make changes to applications, languages, and updates in the image.
After the changes, the size of the image increases to 500 MB.
You need to modify the deployment script to ensure that the recovery partition has the required amount of free space. The solution must minimize the space of the recovery partition.
To which size should you set the recovery partition?
A. 550 MB
B. 820 MB
C. 1024 MB
D. 1524 MB
Answer: B
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/configure-uefigpt-based-hard- drive-partitions

NEW QUESTION NO: 11
You have an image of Windows 10 named Image1.wim. Image1.wim contains a Windows Recovery Environment (Windows RE) image.
You need to add a driver to Windows RE.
Which tool or cmdlet should you use?
A. Windows Imaging and Configuration Designer (Windows ICD)
B. Windows System Image Manager (Windows SIM)
C. dism.exe
D. Add-AppxProvisionedPackage
Answer: C
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/customize-windows-re

NEW QUESTION NO: 12
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have an image of Windows 10 for a new desktop computer model. The computer uses specific out-of- box device drivers stored in the INF format.
You need to update the drivers by using an answer file.
Which parameter should you specify when you run dism.exe?
A. /Add-Capability
B. /Add-Driver
C. /Add-Package
D. /Add-ProvisionedAppxPackage
E. /Apply-CustomDataImage
F. /Apply-Image
G. /Apply-Unattend
H. /Export-Image
Answer: B
Explanation/Reference:
Explanation:

NEW QUESTION NO: 13
DRAG DROP
You need to add drivers to an offline image of Windows 10 by using an answer file.
How should you complete the answer file? To answer, drag the appropriate values to the correct locations.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:

Answer: 


NEW QUESTION NO: 14
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You have several pictures that you plan to make available as desktop backgrounds.
You copy the installation media for Windows 10 to Computer1.
You need to ensure that the Windows 10 image contains the desktop backgrounds.
What should you do first?
A. Mount the Install.wim file.
B. Mount the Boot.wim file.
C. Modify the Winpeshl.ini file.
D. Create an answer file.
E. Modify the Windows.ini file.
F. Create a provisioning package.
G. Load a catalog file (.clg).
H. Create a cabinet file (.cab).
Answer: A
Explanation/Reference:
Explanation:

NEW QUESTION NO: 15
You have a server named Server1 that runs Windows Server 2016. Server1 is located on a network that is disconnected from the Internet.
You have a computer named Computer1 that runs Windows 10.
You download the Windows Assessment and Deployment Kit (Windows ADK) setup on Computer1.
You need to create an installation source on a USB drive that can be used to install Windows ADK on Server1.
Which installation option should you use when you run the Windows ADK setup on Computer1?
A. /list
B. /layout
C. /ceip
D. /features
E. /installpath
Answer: B
Explanation/Reference:
Explanation:
References:
https://technet.microsoft.com/en-gb/library/dn621908.aspx

NEW QUESTION NO: 16
You have a generalized image of the 64-bit version of Windows 10. The image is released to the Out-of- Box-Experience (OOBE).
You need to ensure that when the image is deployed to a computer, the computer starts in audit mode.
What should you do?
A. Create an answer file, and then copy the answer file to the image.
B. When the computer starts, press SHIFT+F10, and then run sysprep.exe /audit.
C. Create a provisioning package, and then copy the provisioning package to the image.
D. When the computer starts, press SHIFT+F10, and then run imagex.exe.
Answer: A
Explanation/Reference:
Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/boot-windows-to-audit-mode-or- oobe