http://https://www.lead1pass.com/NetworkAppliance/NS0-171-practice-exam-dumps.html (58 Q&As Dumps, 30%OFF Special Discount: 30free )

NEW QUESTION NO: 8
Which three actions are required to configure two Cisco Nexus switches as vPC peers? (Choose three.)
A. Modify the network QoS policy.
B. Configure different vPC domain IDs for each switch.
C. Configure matching vPC domain IDs.
D. Create a peer link between switches.
E. Enable the vPC feature.
Answer: A,C,D

NEW QUESTION NO: 9
Your customer has the storage configuration for a FlexPod solution shown below.
--FAS8040 HA-pair
--Disk stack one-4x DS4243 disk shelves (2TB SATA disk drives)
--Disk stack two- 2x DS 2246 disk shelves (1.2TB disk drives)
--There are no unused SAS ports on either controller
--There are no expansion slots available on either controller
The customer wants to attach a single DS2246 disk shelf with 800 GB SSD drives.
In this scenario, what are two ways to connect the new shelf for optimal performance? (Choose two).
A. Cable a new stack for the SSD shelf.
B. Cable the new shelf to the end of stack two.
C. Cable the new shelf to the beginning of stack two.
D. Cable the new shelf to the end of stack one.
Answer: A,C

NEW QUESTION NO: 10
You want to run the FlexPod execution profile in NetApp Config Advisor.
Which three login credentials are required to perform this task? (Choose three.)
A. NetApp cluster
B. NetApp support login
C. UCS Manager
D. ESXi server
E. Nexus switches
Answer: A,B,C
Explanation/Reference:
Reference ftp://ftp.una.ac.cr/Pc/Otros/Netapp/
Config_Advisor_4.3_Installation_and_Administration_Guide.pdf

NEW QUESTION NO: 11
Your company is looking for a small remote office infrastructure to deploy to your 30 remote sites. You are asked to write deployment procedures for each site. Your goal is to have each site deployed in less than a day.
Which tool will help you accomplish your goal?
A. OnCommand System Manager
B. UCS Manager
C. OnCommand Insight
D. UCS Director
Answer: D

NEW QUESTION NO: 12
Which two technologies must be deployed for a Cisco Nexus 9000 ACI design? (Choose two.)
A. spine switch
B. VSM
C. APIC
D. LACP
Answer: A,C
Explanation/Reference:
Reference https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-737909.html

NEW QUESTION NO: 13
Click the Exhibit button.

You have a FlexPod solution with vSphere ESXi. When you click the icons shown in the exhibit, you do not see any network connectivity details.
Which Cisco UCS policy type should you create to enable visibility of these details?
A. Link Profile Policy
B. Link Protocol Policy
C. LAN Connectivity Policy
D. Network Control Policy
Answer: C
Explanation/Reference:
Reference https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/ b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_010101.html

NEW QUESTION NO: 14
Click the Exhibit button.

You have FCoE configured between your Nexus 5672UP switches and UCS Fabric Interconnects running in FC end-host mode. You are experiencing disk I/O errors on your VMware FCoE datastore, but the NFS datastores on the same NetApp storage system are not experiencing any problems.
Referring to the Nexus output shown in the exhibit, what would cause this problem?
A. "VL bmap" is hard to set to "off".
B. The FCoE uplinks from the Fabric Interconnects must use the ports on the far right side of the Nexus switches.
C. Port flow-control is currently off.
D. The no-drop QoS classes on the Fabric Interconnects are different than those on the Nexus switches.
Answer: D

NEW QUESTION NO: 15
You are creating the Gold Master Boot LUN for Windows 2012 R2 Hyper-V hosts.
In this scenario, which three steps are needed to ensure that all Hyper-V hosts will work as desired?
(Choose three.)
A. Use a temporary service profile to install and configure the OS.
B. Use Sysprep to prepare the operating system for duplication.
C. Enter in the Windows license key to activate Windows before cloning the LUN.
D. Map all Hyper-V hosts to the same Gold Master Boot LUN for consistency.
E. Disassociate the service profile before cloning the LUN.
Answer: A,C,D

NEW QUESTION NO: 16
An administrator is configuring a Flexpod Datacenter solution. The UCS service profiles will use FCoE connectivity to the NetApp cluster.
Which pool is needed to configure the vHBA templates?
A. WWPN pool
B. IQN pool
C. WWNN pool
D. MAC pool
Answer: A

NEW QUESTION NO: 17
You are asked to increase read performance for a single aggregate; however, there are no PCI-e slots available in the NetApp cluster nodes.
In this scenario, which feature meets these requirements?
A. Flash Cache
B. Thin Provisioning
C. Flash pool
D. Advanced Drive Partitioning
Answer: C

NEW QUESTION NO: 18
A customer asks you to configure QoS on a Cisco Nexus 7000 Series switch within a FlexPod solution.
Which three steps are required to accomplish this task? (Choose three.)
A. Attach policies to logical or physical interfaces and VLANs.
B. Define traffic classes.
C. Associate policies and actions with each traffic class.
D. Attach policies to logical or physical interfaces and VSANs.
E. Perform a shut/no shut on the affected interfaces.
Answer: B,C,D
Explanation/Reference:
Reference https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/ cli_rel_4_0_1a/CLIConfigurationGuide/QoS.html