http://https://www.examslabs.com/IBM/IBM-Certified-Deployment-Professional/best-C9060-521-exam-dumps.html (70 Q&As Dumps, 30%OFF Special Discount: bmzblwH7 )

NEW QUESTION NO: 7
Which three components can be installed from the IBM Spectrum Protect Backup-Archive Client package?
(Select three.)
A. Backup-Archive Web Client
B. IBM Spectrum Protect API
C. Bare Machine Recovery for IBM Spectrum Protect
D. Client Management Service
E. Administrative Command Line Client
F. IBM Spectrum Protect HSM
Answer: A,B,D
Explanation/Reference:
Explanation:
You install the backup-archive client.
You install the IBM Spectrum Protect API.
You can install IBM Spectrum Protect client management services to collect diagnostic information about the backup-archive client.
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/client/c_inst.html

NEW QUESTION NO: 8
An IBM Spectrum Protect administrator has set up an environment with V8.1 servers as Library Manager (LIBMGR1), Library Client (LIBCL1) and a Tape Library (SharedLIB) and are connected on SAN. Where would the following command be run to define drives and paths for the Library Client?
perform libaction sharedlib action=define source=libc11
A. Storage agent server
B. Library manager LIBMGR1
C. Library client LIBCL1
D. Tape Library SharedLIB
Answer: B
Explanation/Reference:
Explanation:
Example: Define a shared library
Assume that you are working in a SAN and that you configured a library manager named LIBMGR1. Now, define a library that is named SHAREDTSM to a library client server named LIBCL1.
Issue DEFINE LIBRARY from the library client server, LIBCL1:
define library sharedtsm libtype=shared primarylibmanager=libmgr1
Then, issue PERFORM LIBACTION from the library manager, LIBMGR1, to define the drive paths for the library client:
perform libaction sharedtsm action=define source=libcl1
References: IBM Spectrum Protect for Windows, Version 8.1.0, Administrator's Reference, page 698

NEW QUESTION NO: 9
Which option is added to ensure that all of the commands before the next SERIALcommand complete before the script continues when scripting multiple commands in PARALLEL?
A. WAIT=ON
B. CONTINUE=NO
C. PRIORITY=1
D. WAIT=YES
Answer: D
Explanation/Reference:
Explanation:
Wait
Specifies whether to wait for the server to complete processing this command in the foreground. The default is NO. Possible values are:
No

Specifies that the server processes this command in the background. Use the QUERY PROCESS command to monitor the background processing of this command.
Yes

Specifies that the server processes this command in the foreground. You wait for the command to complete before continuing with other tasks. The server then displays the output messages to the administrative client when the command completes. If you are backing up multiple file systems, all backup processes must complete before the command is complete.
References: IBM Spectrum Protect for Windows, Version 8.1.0, Administrator's Reference, page 72
https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.reference/ b_srv_admin_ref_windows2.pdf

NEW QUESTION NO: 10
What does the REUSEDELAY parameter of the define stgpoolcommand for POOLTYPE=CLOUD specify?
A. the number of days that expired data extents must remain in the storage pool before they can be deleted
B. the number of days after extents are removed before the container space can be reorganized
C. the number of days before a volume can be reused in a container storage pool
D. the number of versions of the database backup that must be retained
Answer: A
Explanation/Reference:
Explanation:
How does the storage pool REUSEDELAY parameter affect data extents in a container storage pool?
By specifying how long data extents, that are no longer referenced, can be eligible for reuse before they are removed from the storage system. The data deduplication process for directory-container and cloud- container storage pools identifies the last date and time that the data extent was referenced to determine whether the data extent can be used again. If the data extent is already used by another object, or if the data extent is within the reuse delay period, the data extent is reused if the data deduplication process matches the data extent. The REUSEDELAY parameter is set in days, and can be increased if longer reuse periods are required. Longer reuse periods mean that the data in the storage pool is retained longer before it is deleted due to lack of use.
References: https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/Tivoli%
20Storage%20Manager/page/Directory-container%20storage%20pools%20FAQs?section=q17

NEW QUESTION NO: 11
What ensures the storage pools, storage containers, and volumes are available to back up client data for multiple IBM Spectrum Protect servers?
A. Run the QUERY VOL * STGPOOL=*administrative command from the Operations Center Command Builder.
B. Click the Reports pod of the IBM Spectrum Protect Operations Center and run the Storage Status report.
C. Click the Pools link in the Storage & Data Availability pod of the IBM Spectrum Protect Operations Center.
D. Click the Servers pod and select details for storage with IBM Spectrum Protect Operations Center.
Answer: A
Explanation/Reference:
Explanation:
Do I need to issue the PROTECT STGPOOL command if I replicate all nodes in a directory-container storage pool?
It is highly recommended that you issue the PROTECT STGPOOL command regardless of the current replication strategy in place. The PROTECT STGPOOL command is a storage level protection mechanism and allows for the repair of damaged extents without any interaction with the inventory. If the PROTECT STGPOOL is issued before the REPLICATE NODE command completes, the replication process completes faster. This is an added benefit as the primary goal is to protect the storage in case of local damage scenario.
References: https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/Tivoli%
20Storage%20Manager/page/Directory-container%20storage%20pools%20FAQs?section=q8

NEW QUESTION NO: 12
A customer with a large Microsoft Hyper-V environment needs to back up the virtual environment. Many of the customer's virtual machines use attached iSCSI disks. Which strategy will back up these Microsoft Hyper-V clients?
A. place an IBM Spectrum Protect client on each VM with iSCSI disks
B. use default configurations of IBM Spectrum Protect for Virtual Environments
C. only image backups are supported
D. Microsoft Hyper-V clients require a client on each VM for backup
Answer: A
Explanation/Reference:
Explanation:
Data Protection for Microsoft Hyper-V also does not back up Hyper-V virtual machines with attached iSCSI disks. This is because Data Protection for Microsoft Hyper-V uses Volume Shadow Copy Service (VSS) for backup operations and VSS cannot create a snapshot of the iSCSI disks. If you try to back up a virtual machine with attached iSCSI disks, the operation fails.
References: https://www.ibm.com/support/knowledgecenter/SSERB6_8.1.0/ve.hv/c_ve_hv_limitations.html

NEW QUESTION NO: 13
Which IBM Spectrum Protect client option is necessary in order to have the Client Acceptor Daemon (CAD) manage the Client Scheduler?
A. MANAGEDServices SCHEDULE
B. SHMPort nnnn
C. SCHEDMODe PROMPTED
D. TCPCLIENTPort nnnn
Answer: A
Explanation/Reference:
Explanation:
Client acceptor daemon-managed services is defined using the managedservices schedule option and started with client acceptor daemon services (dsmcad).
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/client/ c_sched_cadvstrad.html

NEW QUESTION NO: 14
Which client scheduling mode requires that the client register its TCP/IP address with the server?
A. Client-polling
B. Client-prompted
C. Server- prompted
D. Server- polling
Answer: C
Explanation/Reference:
Explanation:
Prompted Specifies that only the server-prompted mode can be used. This mode is only available for clients that communicate with TCP/IP. Client nodes wait to be contacted by the server when scheduled work needs to be performed and a session is available.
Incorrect Answers:
A: A client-polling scheduling mode is a client/server communication technique where the client queries the server for work.
B: There is no mode called server-prompted.
D: No such mode server-polling.
References: IBM Spectrum Protect for Windows, Version 8.1.0, Administrator's Reference, page 1261

NEW QUESTION NO: 15
Which administrative authority level is required to back up the IBM Spectrum Protect server database?
A. Operator
B. Policy
C. Storage
D. Node
Answer: A
Explanation/Reference:
Explanation:
An administrator with system authority can complete any task with the server and assign authority levels to other administrators.
Administrators with policy, storage, or operator authority can complete subsets of tasks.
An operator can perform backups.
Incorrect Answers:
A: An administrator with system authority can complete any task with the server and assign authority levels to other administrators.
References: https://www.ibm.com/support/knowledgecenter/SSERB6_8.1.0/ve.inst/c_ve_tsmadmin.html

NEW QUESTION NO: 16
Which command will allow an administrator to mark an entire container as damaged?
A. REPAIR CONTAINER
B. AUDIT CONTAINER
C. FIX CONTAINER
D. UPDATE CONTAINER
Answer: B
Explanation/Reference:
Explanation:
Mark all data extents in the container storage pool as damaged by issuing the AUDIT CONTAINER command for the container storage pool at the storage pool level, and specifying the ACTION=MARKDAMAGED parameter.
For example, to audit a storage pool that is named STGPOOL1 and mark it as damaged, issue the following command:
audit container stgpool=stgpool1 action=markdamaged
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.admin/ t_stgp_repair_drmix.html

NEW QUESTION NO: 17
During the IBM Spectrum Protect configuration on an AIX clustered environment, a checkbox is selected to indicate that this item is a secondary node. On which node of the cluster is the dsmicfgx wizard run?
A. Backup node
B. Standby node
C. Production node
D. Failover node
Answer: B
Explanation/Reference:
Explanation:
Complete the following steps to set up the standby node:
On the standby node, open the shared volume group and any IBM Spectrum Protect file systems.

On the standby node, install the IBM Spectrum Protect product code. For more information, see

Installing the IBM Spectrum Protect server on a production node for PowerHA. If the executable files are installed on shared disk space, you might need to install them on the standby node. IBM Spectrum Protect device drivers, SMIT panels, and other files must be installed in AIX® system directories.
Open the dsmicfgx wizard. Follow the instructions to complete the configuration. Select the check box

to indicate that this item is a secondary node in the cluster.
Start the server on the standby node.

Etc.
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.admin/ t_hacmp_setupstandby.html