ITbraindumps's training product for Cisco certification 300-115 exam cost includes simulation test and the current examination. On Internet you can also see a few websites to provide you the relevant training, but after compare them with us, you will find that ITbraindumps's training about Cisco certification 300-115 exam cost not only have more pertinence for the exam and higher quality, but also more comprehensive content.

ITbraindumps Cisco 300-470 Free download are made ​​in accordance with the latest syllabus and the actual Cisco 300-470 free download. We constantly upgrade our training materials, all the products you get with one year of free updates. You can always extend the to update subscription time, so that you will get more time to fully prepare for the exam. If you still confused to use the training materials of ITbraindumps, then you can download part of the examination questions and answers in ITbraindumps website. It is free to try, and if it is suitable for you, then go to buy it, to ensure that you will never regret.

Practice what you preach is the beginning of success. Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results. ITbraindumps's Cisco 300-470 study guide are the best training materials for this exam. With it you will have a key to success. ITbraindumps's Cisco 300-470 study guide are absolutely reliable materials. You should believe that you can pass the exam easily, too. 

It is inconceivable that ITbraindumps Cisco 300-115 exam cost have 100% hit rate. The dumps cover all questions you will encounter in the actual exam. So, you just master the questions and answers in the dumps and it is easy to pass 300-115 exam cost. As one of the most important exam in Cisco certification exam, the certificate of Cisco 300-115 exam cost will give you benefits. And you must not miss the opportunity to pass 300-115 exam cost successfully. If you fail in the exam, ITbraindumps promises to give you FULL REFUND of your purchasing fees. In order to successfully pass the exam, hurry up to visit ITbraindumps.com to know more details.

Exam Code: 300-115
Exam Name: Implementing Cisco IP Switched Networks (SWITCH v2.0)
One year free update, No help, Full refund!
300-115 Exam Cost Total Q&A: 191 Questions and Answers
Last Update: 01-26,2016

300-115 Test Questions Detail: 300-115 Exam Cost

Exam Code: 300-470
Exam Name: Automating the Cisco Enterprise Cloud
One year free update, No help, Full refund!
300-470 Free download Total Q&A: 60 Questions and Answers
Last Update: 01-26,2016

300-470 Exam Tests Detail: 300-470 Free download

NO.1 Enablement of which feature puts the port into err-disabled state when the port has PortFast
enabled and it receives BPDUs?
A. BackboneFast
B. BPDU filtering
C. EtherChannel
D. BPDU guard
Answer: D

300-115 Dumps PDF   

NO.2 Refer to the exhibit.
When a network administrator is attempting an SSH connection to the device, in which order does
the device check the login credentials?
A. Line password, RADIUS server, local username
B. Line password, local username, RADIUS server
C. RADIUS server, line password, local username
D. RADIUS server, local username, line password
Answer: D

300-115 Exam Dumps   
Explanation:
sessions use the vty lines, where the configured authentication method is named "default." The AAA
default login preference is stated in order from first to last, so here the "aaa authentication login
default group radius local line" means to use RADIUS first, then if that fails use the local user
database. Finally, if that fails use the line password.

NO.3 Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution
and core switches) that provides LAN connectivity from user PCs to corporate servers. The
distribution switches are configured to use HSRP to provide a high availability solution.
DSW1 -primary device for VLAN 101 VLAN 102 and VLAN 105
DSW2 - primary device for VLAN 103 and VLAN 104
A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its
status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed.
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running
configurations and show commands, you have been asked to investigate and respond to the
following question.
What is the priority value of the VLAN 105 HSRP group on DSW2?
A. 150
B. 50
C. 200
D. 100
Answer: D

300-115 exam   
Explanation:
Use "show standby brief" command on console2. Very easy to se" priority of Vlan1"5 is 100.

NO.4 After implementing VTP, the extended VLANs are not being propagated to other VTP switches.
What should be configured for extended VLANs?
A. Ensure that all switches run the same Cisco IOS version. Extended VLANs will not propagate to
different IOS versions when extended VLANs are in use.
B. VTP does not support extended VLANs and should be manually added to all switches.
C. Enable VTP version 3, which supports extended VLAN propagation.
D. VTP authentication is required when using extended VLANs because of their ability to cause
network instability.
Answer: C

300-115 test   300-115 Latest Dumps   
Explanation:
VTP version 1 and VTP version 2 do not propagate configuration information for extended-range
VLANs (VLAN numbers 1006 to 4094). You must configure extended-range VLANs manually on each
network device.
VTP version 3 supports extended-range VLANs (VLAN numbers 1006 to 4094). If you convert from
VTP version 3 to VTP version 2, the VLANs in the range 1006 to 4094 are removed from VTP control.
Reference:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/config_guide/sup2T/vtp.p
d f

NO.5 Which command globally enables AAA on a device?
A. aaa authentication
B. aaa accounting
C. aaa authorization
D. aaa new-model
Answer: D

300-115 Questions and answers   300-115 questions   
Explanation:
To configure AAA authentication, enable AAA by using the aaa new-model global configuration
command. AAA features are not available for use until you enable AAA globally by issuing the aaa
new-model command.
Reference:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfathen.ht
ml

NO.6 Which statement about Cisco Discovery Protocol configuration on a Cisco switch is true?
A. CDP is enabled by default and can be disabled globally with the command no cdp enable.
B. CDP is disabled by default and can be enabled globally with the command cdp enable.
C. CDP is disabled by default and can be enabled globally with the command cdp run.
D. CDP is enabled by default and can be disabled globally with the command no cdp run.
Answer: D

300-115 Questions and answers   
Explanation:
CDP is enabled on your router by default, which means the Cisco IOS software will receive CDP
information. CDP also is enabled on supported interfaces by default. To disable CDP on an interface,
use the "no cdp enable interface" configuration command. To disable it globally, use the "no cdp run"
command.
Reference:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf015.html#wp101757
3

NO.7 Refer to the exhibit.
Which option shows the expected result if a show vlan command is issued? A)
B)
C)
D)
A. Exhibit B
B. Exhibit D
C. Exhibit A
D. Exhibit C
Answer: C

300-115 Study Materials   
Explanation:
In this case, the port has been configured both as a trunk and as a switchport in data vlan 10.
Obviously, a port can not be both, so even though Cisco IOS will accept both, the port will actually be
used as a trunk, ignoring the switchport access VLAN 10 command.

NO.8 Which command configures an HSRP group to become a slave of another HSRP group?
A. standby group track
B. standby follow
C. standby group backup
D. standby slave
Answer: B

300-115 pdf   

300-115 Braindumps: http://300-115-test-exam22.braindumps.xyz