70-417 Latest Exam Braindumps
Question 9: DRAG DROPYour network contains four servers that run Windows Server 2012 R2.
Each server has the Failover Clustering feature installed. Each server has three network adapters
installed. An iSCSI
SAN is available on the network.
You create a failover cluster named Cluster1. You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1.
What should you do?
To answer, drag the appropriate network communication setting to the correct cluster network or
networks. Each
network communication setting may be used once, more than once, or not at all. You may need to
drag the split bar
between panes or scroll to view content.
Correct Answer:
Explanation:
If your cluster uses iSCSI or Fibre Channel over Ethernet (FCoE) for the cluster's shared storage, this
traffic goes
through an Ethernet network which the cluster will identify as a cluster network. To avoid storage I/O
performance
being affected with iSCSI or FCoE, it is recommended that you provide a dedicated network for
storage traffic so that
other network traffic does not interfere with this dat
a. For this reason it is recommended that you do not use this network for cluster traffic, live
migration or any other
use. This can be configured by right-clicking on the network in Failover Cluster Manager, selecting
Properties, and
selecting the radio button for "Do not allow cluster network communication on this network".
