70-291 Latest Exam Braindumps
Question 12: 131.107.12.0/24Answer
:
2.You are the network administrator for your company.All servers run Windows Server 2003. All servers
are configured with static IP addresses.All client computers run Windows XP Professional.All client
computers are configured as DHCP clients.
The company has a main office and one branch office.The offices are separated by a router.A DHCP
server is deployed in each office.
One of the DHCP servers shuts down unexpectedly.It takes four hours to repair the server.During that
time, several mobile users connect their portable computers to the network and report that they cannot
connect to shared resources on the network.
After the server is repaired, you create a new scope on each DHCP server that includes IP addresses for
the other office.You activate the scopes.
You test the new DHCP configuration by shutting down the DHCP server in the main office.You find out
that the client computers in the main office are not receiving IP addresses from the DHCP server in the
branch office. You need to ensure that when the DHCP server in one office fails, the client computers will
receive a correct IP
address configuration from the DHCP server in the other office.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Configure the router between the offices to forward BOOTP broadcasts.
B.Configure the DHCP server in each office with a DHCP scope that includes the same IP addresses as
the DHCP server in the other office.Activate the scope.
C.Configure the DHCP server in each office with an additional network adapter.Connect each new
network adapter to the local network.Assign an IP address from the other office's network to each new
network adapter.
D.Install and configure a DHCP relay agent in each office.
Correct Answer: DA
3.You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The network contains a Web server named Server1 that runs IIS 6.0 and hosts a secure Web site.The
Web site is accessible from the intranet, as well as from the Internet.All users must authenticate when
they connect to Server1.
All users on the Internet must use a secure protocol to connect to the Web site.Users on the intranet do
not need to use a secure protocol.
You need verify that all users are using a secure protocol to connect to Server1 from the Internet.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Monitor the events in the application log on Server1.
B.Monitor the events in the security log on Server1.
C.Monitor the Web server connections on Server1 by using a performance log.
D.Monitor network traffic to Server1 by using Network Monitor.
E.Monitor the IIS logs on Server1.
Correct Answer: ED
4.You are the administrator of an Active Directory domain.All servers run Windows Server 2003. All client
computers run Windows XP Professional.All computers are members of the domain.
The Secure Server (Require Security) IPSec policy is assigned to a file server named Server6. The policy
is configured as shown in the exhibit.(Click the Exhibit button.)
Users report that they cannot access shared folders on Server6. Users were able to access shared
folders on
Server6 prior to the implementation of the IPSec policy.
You need to ensure that all client computers in the domain can access the shared folders on Server6. You
must ensure that all communications between client computers and Server6 be encrypted.
What should you do?
A.On Server6, enable the All ICMP Traffic IP Security rule in the properties of the Secure Server (Require
Security) IPSec policy.
B.On Server6, enable the <Dynamic> IP Security rule in the properties of the Secure Server (Require
Security)
IPSec policy.
C.On all client computers, assign the Client (Respond Only) IPSec policy.
D.On all client computers, install an IPSec communication certificate in the local machine store.
Correct Answer: C
5.You are a network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The company has a main office and one branch office.The perimeter networks for each office are
configured as shown in the exhibit.(Click the Exhibit button.)
You configure an L2TP/IPSec VPN tunnel between Server1 and Server2. You also configure and assign
an IPSec
policy named RASIPSec that requires secure communications.
You need to ensure that no unsecured traffic from the Internet reaches the internal network through this
VPN.You
also need to ensure that access to the VPN servers from their respective internal networks is not
disrupted. What should you do?
A.Configure input and output L2TP/IPSec packet filters on the internal interfaces of Server1 and Server2.
B.Configure input and output L2TP/IPSec packet filters on the external interfaces of Server1 and Server2.
C.In the properties of RASIPSec, edit the All IP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
D.In the properties of RASIPSec, edit the All ICMP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
Correct Answer: B
6.You are the administrator of an Active Directory domain.The network contains a Windows Server 2003
domain controller named Server1.
Users report that they experience intermittent delays when they log on to Server1. Administrators report
that replication attempts between Server1 and other domain controllers are occasionally delayed.
You need to verify the cause of the intermittent connection delays to Server1. You also need to find out
whether the problem is related to a hardware deficiency on Server1. You need to track these delays over
a period of one day.
What should you do first?
A.Run the netdiag /verbose command to perform a network diagnostic test on Server1.
B.Run the replmon command to view the Active Directory replication status on Server1.
C.Use Network Monitor to view the network traffic packet contents between Server1 and all other
computers.
D.Create a System Monitor counter to track the queue lengths on the network adapter on Server1.
Correct Answer: D
