ACMP Latest Exam Braindumps
Question 1: When an Aruba 6000 controller has two M3 modules installed, for which uses may the modules beused? (Choose all the correct answers.)
A. hot standby operations
B. VRRP backup
C. higher AP density per switch chassis
D. Active-Active masters
Correct Answer: B,C
NO: 6 Referring to the above screen capture,
which tab tells you which licenses are installed on the controller?
A. Controller Summary
B. All Wlan Controllers
C. Process Logs
D. Inventory
Correct Answer: D
Topic 1, Volume A
NO: 7 Which method is NOT supported to provision an Aruba thin AP?
A. Telnet directly to AP
B. SSH to the AP's controller
C. Web interface to the AP's controller
D. Console to AP
Correct Answer: A
NO: 8 The configuration wizard enables which of the following controller clock configurations?
A. NTP to a time server
B. Manually setting the date time
C. Daylight savings time
D. Only GMT can be configured
Correct Answer: A,B
Topic 2, Volume B
NO: 9 If a Remote AP (RAP) is attempting to contact a controller that is behind a NAT device what
protocol must be allowed through the NAT/Firewall?
A. PAPI
B. NATT
C. IPSec
D. The controller must have a public IP address.
Correct Answer: B
Topic 1, Volume A
NO: 10 When configuring a server group containing 3 servers, a customer chooses 'fail through mode'.
What other feature has to be enabled on the controller for this to work?
A. Machine authentication
B. EAP Termination
C. Server group fall through mode
D. MAC authentication
Correct Answer: B
